Kippzonen SOLYS 2 Sun Tracker Manual de usuario descargar pdf (Pagina 13)

3.4 MOUNT THE TRACKER ON THE TRIPOD WITH THE E ON THE MOUNTING

FLANGE POINTING EAST

The SOLYS 2 is supplied with a standard ∅ 102 mm bottom flange, which has a 3-hole M8 mounting pattern

to match the Tripod Stand with leveling feet. The tripod has 3 slots for mounting the 3 M8 bolts to the

bottom flange. Both the E mark on the bottom flange and the K&Z logo on the tripod must point East when

the SOLYS 2 is mounted. Ideally the bolts should be in the middle of the slots when the tripod is mounted to

the SOLYS 2. This allows fine tuning the position afterwards

Note: Turn in the M 8 bolts by hand but do not fasten during first installation. Only after the alignment with

the sighting target on the pyrheliometer (bracket) they need to be fastened. (chapter 3.7)

Remember that sun is required for this alignment.

Figure 4.2: Mounting the SOLYS 2 on the Tripod Stand

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 65 66

Sin comentarios

Kippzonen SOLYS 2 Sun Tracker Manual de usuario Pagina 13